TSB : Steering Wheel Turning Force

Details

On all models, raise front wheels off ground. Connect pressure gauge between steering pump and steering gear. See Figure . Ensure gauge can be seen from driving position. Ensure reservoir is full. Remove air bag module from steering wheel. See AIR BAG MODULE & STEERING WHEEL under REMOVAL & INSTALLATION in STEERING COLUMNS article. Place torque wrench on steering wheel nut. With engine at idle, turn steering wheel slowly to right. Read torque when pressure reaches 171 psi (12 kg/cm 2 ). Turn wheel to left. Torque should be 6.2 INCH lbs. (0.7 N.m) for 850, C70, S70 and V70 and 9 INCH lbs. (1 N.m) for 960, S90 and V90 as gear approaches specified pressure. Turn steering wheel to right and read torque. If exceeds specification, repair or replace steering gear.