TSB : Symptom Checks Using Scan Tool PIDs

Details

Check and compare the following PID values to PID specifications in appropriate PIN VOLTAGE/PID VALUE CHARTS article. NOTE: On some models, DPFEGR PID may not be available. DPFEGR If DPFEGR HOT IDLE PID is not within .15 volt of KOEO value, go to TEST HE, step 100) under SYSTEM TESTS in SELF-DIAGNOSTICS - EEC-V - GASOLINE & NGV article. LONGFT1 &/Or LONGFT2 If LONGFT1 or LONGFT2 PID is low (-20 percent or less), concentrate checks in areas that would cause engine to run rich. If LONGFT1 or LONGFT2 PID is high (+20 percent or more), concentrate checks in areas that would cause engine to run lean. IMTVF (Econoline & Pickup 4.6L, & Blackwood & Navigator 5.4L (4V) Only Ensure transmission is in Park or Neutral. Record IMTVF PID value when ignition switch is turned to OFF position. Then start engine and raise engine speed to 3000 RPM. IMTVF PID value should indicate NO (no fault) in both situations. If IMTVF PID value indicates YES (fault is present) during either situation, go to TEST HU, step 65) under SYSTEM TESTS in SELF-DIAGNOSTICS - EEC-V - GASOLINE & NGV article.