TSB : Solenoid Valve 2 (Shift Cylinder Selection), Short Circuit To Ground

Details

P0976 Diagnosis information - PDK Solenoid valve 2 (shift cylinder selection), short circuit to ground Diagnostic conditions The control unit initially tests internal function sequences when the ignition is switched on (terminal 15). If they are OK, all diagnosable outputs are then tested and any faults are stored. - Ignition on - The following fault is not detected: P1832 - The following fault is not detected: P183A Possible fault causes - Line between solenoid valve 2 and PDK control unit faulty - Solenoid valve 2 faulty - PDK control unit faulty Fault setting conditions - Internally measured current value is too high Fault effects - Solenoid valve power supply switch-off - Engaged gear is held until vehicle stops - Moving off possible in all gears - Transmission limp-home indication in instrument cluster control unit