Mazda Millenia Fluid Specifications
Verified fluid grades and capacities for your car. (1995–2002)
Capacities
| Specification | Value |
|---|---|
| (1) | Total system capacity, unless otherwise noted. |
| (1) Total system capacity, unless otherwise noted. (2) Compressor refrigerant oil capacity. |
(1)
Total system capacity, unless otherwise noted. |
| (1) Total system capacity, unless otherwise noted. (2) Compressor refrigerant oil capacity. (3) Use ND-Oil 8 refrigerant oil (Part No. 38899-PR7-003). (4) Use ND-Oil 8 refrigerant oil (Part No. 38885- |
(1)
Total system capacity, unless otherwise noted. |
| (2) | Compressor refrigerant oil capacity. |
| (3) | Use ND-Oil 8 refrigerant oil (Part No. 38899-PR7-003). |
| (4) | Use ND-Oil 8 refrigerant oil (Part No. 38885-09109). |
| (5) | Use PAG YN-12b oil (Part No. F2AZ-19577). |
| (6) | Use ND-Oil 9 refrigerant oil. |
| 626 |
(2) 8.1
26.5 |
| (7) | Use ATMOS GU-10 refrigerant oil. |
| (8) | Use PAG SP10 refrigerant oil. |
| (9) | Use PAG SP20 refrigerant oil. |
| B2300, B3000 & B4000 |
(5) 7.0
22.0 |
| B2500, B3000 & B4000 |
7.0
29.6 |
| Capacity | 1.25 |
| Compressor | 5.9 |
| Condenser | 0.7 |
| Coolant Capacity | 7.5 |
| Cooler pipe | 0.3 |
| Drain and Refill | 8.0 |
| Drain and Refill | 8.5 |
| Dry Fill | 9.3 |
| Evaporator | 1.7 |
| Fluid Capacity |
GF4A-EL Transaxle
8.5 |
| Lubricating Oil | 5.92 |
| Miata |
(6) 4.4-5.7
21.2 |
| Millenia |
(2) 5.9
26.5 |
| Millenia |
(2) (7) 5.9
26.5 |
| MPV |
(2) 6.8
35.3 |
| MX-6 & 626 |
(9) (4) 5.9
24.7 |
| Oil Capacity |
Total Dry Engine
4.9 |
| Power Steering Fluid Capacity | 1.32 |
| Protege |
(2) 4.1
21.2 |
| Protege |
(2) (8) 4.1
21.2 |
| R-134a | 26.5 |
| R-134a | 750 |
| Receiver/Drier | 0.3 |
| Refill Capacity | 7.9 |
| Refrigerant Oil Capacity | 5.92 |
| Without Rear A/C |
(3) 6.8-7.3
31.7 |
| With Rear A/C |
(3) 6.8-7.3
35.2 |
Fluid Types & Grades
| Specification | Value |
|---|---|
| Coolant | Ethylene-glycol-based Do not add alcohol or methanol |
| Coolant | Ethylene-glycol-based Do not add alcohol or methanol in cooling system, may damage aluminum parts. |
| Engine Oil API SG, SH, SJ (ECII) ILSAC |
Viscosity Above -25 Deg. C
SAE 10W - 30 |
| Fluid | ATF M-III or Dexron II |
| Oil Viscosity |
Below 32 deg. F
5w/30 |
| Recommended Fluid Type | ATF M-III or Equivalent |
| Refrigerant Oil Type | ATMOS GU10 |
| Refrigerant Type | R-134a |
| Type | ATF M-III Or Equivalent (e.g. Dexron(R)II) |
| Type | M-III or equivalent e.g. Dexron (R) II |
| Viscocity |
Above -25 deg. C
SAE 10W - 30 |
| Wheel Bearing Grease For vehicles with serviceable wheel bearings. |
Lithium Multipurpose Grease
XG-1-C, Spec. ESA-M1C75-B |
Get fluid reminders for your exact car — Ordo tracks your oil change intervals, coolant age, and brake fluid condition. Free to start.
Track My Fluids Free →