TSB : C1: Check The Voltage Supply To The Engine Coolant Temperature (ECT) Sensor
External Pages
Details
WARNING: This page is about a different variant/trim than selected. Switch the ignition to the OFF position. Disconnect the engine coolant temperature (ECT) sensor electrical connector Pl39. Switch the ignition to the RUN position. Measure the voltage between the engine coolant temperature (ECT) sensor electrical connector Pl39 pin 1, (W) and ground. Is the voltage between 4 and 6 volts? -> Yes : GO to C4 . -> No : GO to C2 .
Check if this TSB affects your Jaguar S-Type 3.0 Litre — track your car in Ordo for instant TSB alerts on your exact VIN.
Track My Car Free →