TSB : Conditions for Running the DTC

Details

WARNING: This page is about a different variant/trim than selected. P0151 DTCs P0068, P0101, P0102, P0103, P0106, P0107, P0108, P0112, P0113, P0116, P0117, P0118, P0120, P0121, P0122, P0123, P0128, P0201, P0202, P0203, P0204, P0205, P0206, P0207, P0208, P0220, P0222, P0223, P0442, P0443, P0446, P0449, P0455, P0496, P1516, P2101, P2119, P2135, P2176 are not set. The Loop Status parameter is Closed. The Ignition 1 Signal parameter is between 10-18 volts. The Fuel Level Sensor parameter is more than 10 percent. The Throttle Position (TP) Indicated Angle parameter is between 3-70 percent. DTC P0151 runs continuously when the above conditions are met for 2 seconds. P0152 DTCs P0068, P0101, P0102, P0103, P0106, P0107, P0108, P0112, P0113, P0116, P0117, P0118, P0120, P0121, P0122, P0123, P0128, P0201, P0202, P0203, P0204, P0205, P0206, P0207, P0208, P0220, P0222, P0223, P0442, P0443, P0446, P0449, P0455, P0496, P1516, P2101, P2119, P2135, P2176 are not set. The Loop Status parameter is Closed. The Ignition 1 Signal parameter is between 10-18 volts. The Fuel Level Sensor parameter is more than 10 percent. The Throttle Position (TP) Sensor parameter is between 0-70 percent. DTC P0152 runs continuously when the above conditions are met for 2 seconds. P0157 DTCs P0068, P0101, P0102, P0103, P0106, P0107, P0108, P0112, P0113, P0116, P0117, P0118, P0120, P0121, P0122, P0123, P0128, P0201, P0202, P0203, P0204, P0205, P0206, P0207, P0208, P0220, P0222, P0223, P0442, P0443, P0446, P0449, P0455, P0496, P1516, P2101, P2119, P2135, P2176 are not set. The Loop Status parameter is Closed. The Ignition 1 Signal parameter is between 10-18 volts. The Fuel Level Sensor parameter is more than 10 percent. The TP Sensor parameter is between 3-70 percent. DTC P0157 runs the lean test continuously when the above conditions are met for 2 seconds. P0158 DTCs P0068, P0101, P0102, P0103, P0106, P0107, P0108, P0112, P0113, P0116, P0117, P0118, P0120, P0121, P0122, P0123, P0128, P0201, P0202, P0203, P0204, P0205, P0206, P0207, P0208, P0220, P0222, P0223, P0442, P0443, P0446, P0449, P0455, P0496, P1516, P2101, P2119, P2135, P2176 are not set. The Loop Status parameter is Closed. The Ignition 1 Signal parameter is between 10-18 volts. The Fuel Level Sensor parameter is more than 10 percent. The TP Sensor parameter is between 3-70 percent. DTC P0158 runs the rich test continuously when the above conditions are met for 2 seconds.